The stable operation of water softening equipment cannot be achieved without meticulous daily inspections. Conducting regular inspections can help identify potential hazards in a timely manner, handle them in advance, prevent sudden malfunctions and shutdowns, and ensure the continuous operation of boilers and circulating water systems.Yuanlai Water TreatmentThe editor has sorted out the key points of daily inspection for everyone from three aspects: key parts, operating parameters, and consumable status.

1. Conduct regular inspections of operating parameters to ensure normal working conditions

When starting up the machine every day, first check the inlet water pressure, outlet water pressure and pressure difference. The normal pressure difference is generally within 0.05-0.1MPaA high pressure difference indicates that the resin layer is clogged and backwashing should be carried out promptly. Observe the hardness of the effluent and conduct a rapid test with hardness reagents to ensure the hardness≤0.03mmol/LOnce the standard is exceeded, immediately check the regeneration program, the condition of the resin or whether the control valve is abnormal. Pay attention to the operating current of the equipment and the status of the control valve. For fully automatic models, it is necessary to confirm that the regeneration cycle and time Settings are correct and there are no error prompts.

2. Inspect the tank and pipelines to prevent leakage and blockage

Check the softening tank, salt tank, pipelines and valves to ensure there is no leakage, seepage or frosting. The flanges and joints should be well sealed to prevent insufficient water pressure and salt loss due to leakage. Check whether the tank body is deformed or corroded, and whether the support feet are firm and not loose. The liquid level in the salt tank remains at 1/2-2/3There are sufficient salt grains without lumps. The salt suction pipeline is unobstructed without blockage or bending to prevent no salt suction or insufficient salt suction during regeneration.

Iii. Inspection of core consumables and accessories, and timely maintenance and replacement

Check the condition of the ion exchange resin. Under normal circumstances, it should be golden yellow with plump particles. If it turns black, becomes sticky or breaks frequently, it indicates that the resin is contaminated or aged, and it needs to be cleaned or replaced in a timely manner. Check the filter element of the precision filter to ensure it is not clogged or damaged. Replace it in time when the pressure difference is normal to prevent impurities from entering the softening tank. Check the control valve (Runxin) / The valve core of the Fulai valve operates smoothly without any jamming, and the control panel keys are sensitive and the display is normal. The motor and water pump operate without abnormal noise or overheating. The grounding is reliable to prevent circuit faults.

4. Inspection of the environment and ancillary facilities to ensure operational conditions

Keep the area around the equipment dry, well-ventilated and clean, free of water accumulation and clutter, and control the temperature within 5-40℃In winter, take good anti-freezing measures to prevent the tank and pipelines from cracking due to freezing. Check that the drainage pipeline is unobstructed, the backwash and regeneration wastewater is discharged normally, and there is no siltation or blockage. The electrical control box is clean and dust-free, with firmly connected circuits that are free from aging and damage, thus avoiding the risks of short circuits and leakage.

The key to daily inspection lies in persistence. By taking a look and checking every day and addressing minor issues early, the probability of downtime due to faults can be significantly reduced. Yuanlai Water Treatment providesSoftened water equipmentInspection guidance, regular maintenance and fault repair services ensure the long-term stable operation of the equipment.