one Raw water pretreatment system

The basis for the production of pure water is right and wrong??Very important. Therefore, to produce pure water, it is essential to choose a place with relatively good raw water quality. Mountain springs, deep Wells, etc. Here, a very important index is involved, which is "electrical conductivity". Generally speaking, the lower the electrical conductivity. The purer the water. The water treatment processes currently in use are all reverse osmosis systems. The treated water can generally reach90%-99%The desalination rate. Now I'll introduce the components of this system.

1.Raw water pump

The raw water pump is used to provide raw water pressure for the raw water pretreatment system. If the raw water has pressure, this equipment can be dispensed with. The general requirement is the pressure of the raw water>＝0.3MP

2.Raw water tank

The function of the raw water tank is simpler; it is used to store raw water. This is to serve as a transit in case the raw water supply fails.

3.Quartz sand filter

This device is mainly used to filter out microorganisms and dust in water to make the raw water clear.

4.Activated carbon filter

This device is mainly used to filter out residual chlorine in water.

5.Dosing system (anion and cation exchange system)

Previously, this system was an anion and cation exchange system, but it was very difficult to operate, labor-intensive and material-consuming. Now, it has been changed to a dosing system that directly adds scale inhibitors to it.

Ii. Reverse Osmosis System

The reverse osmosis system is the core component of the entire pure water system. Only through reverse osmosis can the standard of pure water be achieved. The reverse osmosis system mainly adopts membrane filtration technology. Then water molecules can pass through the reverse osmosis membrane. Some other ions such as calcium, magnesium and sodium are discharged along with the wastewater. The following are the components of this system.

1.Precision filter

This filter mainly filters out large particle molecules in water.

2.Special high-pressure pump

Generally, the high-pressure pump we use here is the Southern Special Pump. Provide strong power for reverse osmosis equipment.

3.Reverse osmosis membrane

Reverse osmosis membranes employ membrane filtration technology. The purpose of purifying water is achieved by allowing water molecules to pass through while other ions cannot.

Iii. Features

Automation of water softening process: This equipment realizes the automation of ion exchange and resin regeneration processes through a program control device.

The water softener is reasonably designed to fully utilize the effective working exchange capacity of the resin.

Labor-saving: No need for dedicated operation, easy to install.

The valve body is made of lead-free brass or engineering plastic.

Water conservation: Water production rate98%That's all.

Energy-saving: Due to the adoption of the siphon principle, regeneration does not require a salt pump.

Convenient adjustment: The regeneration cycle and time can be adjusted as needed.

Tank anti-corrosion: The tank is made of stainless steel, fiberglass reinforced plastic, and steel-lined plastic materials to prevent resin contamination.

Wide applicability: It can be used in industrial boilers, heat exchangers, air conditioners, laundry, bathing equipment, pharmaceuticals, electronics and other industries.

Iv. Application Scope

Industries such as industrial boilers, air conditioners, heat exchangers, hotels and restaurants, chemical engineering, laundry and dyeing, and sanitation that require water softening to prevent the formation of scale.