2t/hIntroduction to Reverse Osmosis Pure Water Equipment

2T/HThe reverse osmosis equipment and the system's desalination rate95%-97%,Based on the electrical conductivity of the raw water300μS/CM2,The conductivity of the produced water is lower10μS/CM2,Its occupied area4500mm*1000mm*2000mm, The ratio of pure water to wastewater is3:1,Continuous24Hourly operation, fully automatic control. Generally, tap water is used as the raw water,When other raw water sources are used as the water source, the pretreatment may be partially adjusted.

Conventional reverse osmosis process: raw water→Raw water pump→Multi-media filter→Activated carbon filter→Cation resin softener→Precision filter→High-pressure pump→Reverse osmosis membranes, in the pretreatment section, depending on the raw water conditions, agents such as flocculants and scale inhibitors can be added to enhance the pretreatment effect. In large-scale reverse osmosis systems, scale inhibitors are usually added to prevent reverse osmosis scaling instead of using softeners.

2t/hThe configuration of reverse osmosis pure water equipment is as follows:

1.1. Raw water pump

Performance Provide the power source for the normal operation of the pretreatment system. The pump is equipped with a corresponding overheat protector and pressure controller, and an automatic alarm will be triggered in case of a fault.Q=4T/H,H=30M,Stainless steel multistage centrifugal pump

1.2. Quartz sand filter

Performance The use of multi-stage quartz sand effectively removes particulate impurities from water.

Features The tank body adoptsFRPMaterial(Stainless steel material can be selected),Φ500*1750mmFRP liningPEInner liner, resistant to acid and alkali corrosion. The incoming water can fully contact the filter layer and be retained without penetrating. Backwashing should be carried out regularly to remove dirt. Processing capacity4t/h.1.3. Activated carbon filter

Performance The use of high-quality activated carbon can effectively remove organic matter, residual chlorine and other substances in water, preventing membrane pollution

Features The tank body adoptsFRPMaterial(Stainless steel material can be selected),Φ500*1750mmFRP liningPEInner liner, resistant to acid and alkali corrosion. The incoming water can fully contact the filter layer and be retained without penetrating. Backwashing should be carried out regularly to remove dirt.1.4. Softener

Performance High-quality ion exchange resins are adopted to remove calcium and magnesium ions from water and prevent scaling.

Features The tank body adoptsFRPMaterial(Stainless steel material can be selected)FRP liningPEInner liner, resistant to acid and alkali corrosion. The incoming water can fully contact the filter layer and be retained without penetrating. Backwashing should be carried out regularly to remove dirt. A softener can be selected based on the quality of the raw water.

1.5. Precision filter

Performance "Adopt5μmPolypropylene filter elements are used to remove fine suspended solids, silt, impurities, etc. from the raw water. They should be replaced regularly to ensure the interception effect.

Features The filter housing is made of engineering plastic, which is corrosion-resistant and has an attractive appearance.1.6High-pressure pump

Specification Q＝4M3/H , H=110 M,P= 2.2KW Stainless steel material

Quantity 1Taiwan

Performance Provide the power source for the normal operation of reverse osmosis membranes. The pump is equipped with a corresponding overheat protector and pressure controller, and an automatic alarm will be triggered in case of a fault.

Features High-quality stainless steel vertical multistage centrifugal pumps are adopted, ensuring reliable operation. The material is stainless steel and is corrosion-resistant.

1.7. Reverse osmosis main unit

Features The adoption of high-quality imported membrane reverse osmosis membrane elements, stainless steel high-pressure pumps, and domestic superior pipe and valve connection parts, along with a complete system process design and high-quality manufacturing, endows this device with excellent performance and production efficiency. System desalination rate95%-97%.